2026-0206 Cle Elum Transfer Station Project Manual

Home Browse Search

DOT Form 224-713 Revised 12/2020 Page 3 12.Temporary Access Connection This is a temporary access connection that shall be immediately closed and removed by the Permit Holder when no longer needed, or by the date listed below, whichever comes first: When the access connection is removed, the Permit Holder shall restore the state highway right-of-way to its original condition, including reseeding if required. Failure by the Permit Holder to remove the access connection as specified herein may result in WSDOT removing the access connection at the Permit Holder’s expense. 13.Access Connection for Emergency Use Only This access connection is for emergency use only and shall be gated and locked at all times to the general public. 14.This is a Non-Conforming Access Connection Permit: Per WAC 468-52-040 Private direct access to the state highway system shall be permitted only when the property has no other reasonable access to the general street system or if access to the general street system would cause traffic operational conditions or safety concerns unacceptable to the local governmental entity. When direct access must be provided the access connection shall continue until such time that other reasonable access to a highway with a less restrictive access control classification or acceptable access to the general street system becomes available and is permitted. It does not meet the minimum spacing from another adjacent driveway or public road intersection of: 125 feet 250 feet 330 feet 660 feet 1320 feet It does not meet the minimum corner clearance standards of WAC 468-52-040(6) of 75 feet 100 feet 115 feet 125 feet 230 feet It exceeds the number of access points for one parcel or contiguous parcels under the same ownership by one or more additional access connections. The existing topography, site conditions, and/or wetland or stream restrictions and buffers prevent the access to be constructed to current standards. Therefore, this access connection shall only continue until such time that a conforming access connection can be constructed or another access to the local street system becomes available and is permitted. Variance Access Connection Permits are only issued on Class 2 through 5 highways. 15. This is a Variance Access Connection Permit: Variance Access Connection Permits (WAC 468-51-105) may be issued, at the discretion of WSDOT, for certain connections not meeting the access classification location and spacing or that exceed the number of connections allowed by the standards adopted for a particular highway segment. It does not meet the minimum spacing from another adjacent driveway or public road intersection of: 125 feet 250 feet 330 feet 660 feet It does not meet the minimum corner clearance standards of WAC 468-52-040(6) of: 75 feet 100 feet 115 feet 125 feet 230 feet It exceeds the number of access points for one parcel or contiguous parcels under the same ownership by one or more additional access connections. The existing topography, site conditions, and/or wetland or stream restrictions and buffers prevent the access to be constructed to current standards. Therefore, this access connection shall only continue until such time that a conforming access connection can be constructed or another access to the local street system becomes available and is permitted. ACP 61716 SR-903 MP 3.45 R Page 3 of 3 Exhibit A COPY