AIA 101 Agreement 08302024 - Laserfiche WebLink

Home Browse Search

1) Sheet E603 & E701-The electrical panel PP -ASP is changed from a 120/208V 3ph panel to a 277/480V 3ph panel as shown on the one -line and in the schedules. 2) Sheet E701- There is a minor adjustment on the one -line for the main switchboard —two circuit breakers have been updated to the correct size and location. 3) Sheet E701- The notes indicate the irrigation pump enclosure will require a stepdown transformer and it is identified as being supplied by the irrigation pump manufacturer. 4) Drawing E200 was added to identify the required conduit and wiring for the aeration and recirculation pump power and controls. 1.12.1 Revised Civil Drawings Sheets C20, C24, Revised drawings are added to C27 Addendum No. 1. 1.13 Revised Specification Section 40 95 13 Revised specification is added to Section 40 95 13 Control Addendum No. 1. Panels, VFDS, and RMC 1.14 Water Recirculation Section 40 95 14 New specification is added to System Specification Addendum No. 1 for Leachate Pond water recirculation system. 1.15 Dewatering Section 0150 00 Add following statement at the end of Part 1.9, the paragraph of Part 1.9, subsection B Subsection B in Section 0150 00: If dewatering is required, the Contractor will be required to build temporary sedimentation ponds or sedimentation trap BMPs which discharge to the project storm system in accordance with State of Washington - Department of Ecology - 2019 Stormwater Management Manual for Eastern Washington, Chapter 7, Element #10, Page 769. Alternately, BMPs can drain to a temporary gravity or pumped conveyance system draining Page 3of5