Laserfiche WebLink
2023 Docket Enabling Ordinance December 19, 2023 <br />Page 146 <br /> <br /> <br />8. Utility depth shall be dimensioned from finished roadway grade. <br />9. Ditch profile where ditches are proposed for drainage. <br />10. All existing curbs, gutters, sidewalks and pavement adjacent to the <br />proposed design. Basis for existing grades shall be as-built elevations at <br />intervals not to exceed 25 feet. Previously approved designs are not an <br />acceptable means of establishing existing grades. <br />11. Elevation and location of all existing and new utilities in the immediate <br />vicinity of the construction shall be shown on the plans. <br />12. Profiles for all curb returns (except medians). <br /> <br />C. Details. All details necessary for a complete set of plans that are not covered by <br />reference to the WSDOT Standard Plans such as walls, special drainage elements, major <br />culverts, etc. shall be included in the plans. <br />D. Standard Plans. The submitted plans shall include copies of all WSDOT standard <br />plans (or standard plans from other sources) that are referenced within the plans. <br />E. Temporary Erosion Control Plan. A temporary erosion/sedimentation control <br />plan, showing the location and control measures intended to minimize the effects of <br />erosion and siltation due to construction operations, shall be submitted with the <br />construction plans and shall conform to the requirements of the WSDOT Standard <br />Specifications. <br />F. Signing and Striping Plan. All road development plans must incorporate a <br />separate signage and striping plan that consist of an overall area map noting all <br />specific use areas, such as schools, parks, recreation centers, library, commercial, <br />industrial, etc. The pages following the area map are to be broken down into road <br />segments, for notation of signage and striping details. <br />G. Notes: <br />In addition to other notes required in these Standards, the following notes shall appear <br />on the cover sheet of all submittals containing roadway plans. If a cover sheet has not <br />been used, they shall be placed on the sheet of the plans containing roadway design <br />criteria.