Laserfiche WebLink
2023 Docket Enabling Ordinance December 19, 2023 <br />Page 121 <br /> <br /> <br />1The County Engineer may limit the width of the accesses based on site constraints such as site triangles, <br />access spacing, lot density, etc. <br />2Driveways with grades exceeding 15% shall require a variance. <br />3County Engineer may alter driveway standards for driveways less than 50 feet in length <br />12.04.07.070 Obtaining a Permit. <br />A. Driveway access permit applications shall be reviewed and approved by the County <br />Engineer. Persons wishing to obtain a permit should submit a driveway approach <br />permit application to the Kittitas County Department of Public Works, along with the <br />permit fee per KCC 12.02.030 unless having been approved during the plat process as <br />described in KCC 12.04.07.020 <br />B. Following initial review by the County Engineer, the following additional items may <br />be required if applicable: <br />1. Proposed access design plans including: <br />a. Road and driveway plan and profile, <br />b. Site distance evaluation. <br /> <br />2. Site drainage plan clearly showing the impacts to the road and right-of-way, <br /> <br />3. Culvert and drainage improvement plans and details for the approach location, <br /> <br /> <br />4. Map detailing utility locations before and after development in and along the <br />road, <br /> <br />5. A subdivision zoning or development plan, <br /> <br />6. Property map indicating other access and abutting public roads and streets, and <br /> <br /> <br />C. The Department will work cooperatively with applicants when determining requirements <br />on access requests. Prior to issuing a denial on an access permit request, the Department <br />shall attempt to resolve the reasons for the denial with the applicant, <br />