Laserfiche WebLink
<br />KCHD ORDINANCE 1999- 35 SOLID WASTE REGULATIONS <br />(2) The design of the storage, treatment, and handling facilities on-site for incoming waste, as well <br />as the storage, treatment, and handling on-site, and/or the transportation off-site, of fly ash, <br />bottom ash and any other wastes produced by air or water pollution controls; and <br />(3) The design of the incinerator or thermal treater, including changing or feeding systems, <br />combustion air systems, combustion or reaction chambers, including heat recovery systems, <br />ash handling systems and air pollution and water pollution control systems. Instrumentation <br />and monitoring systems design shall also be included. <br />b. An operation plan that includes, but is not limited to: <br />(1) Cleaning of storage areas as required by WAC 173-304-440 (2)(a); <br />(2) Alternative storage plans for breakdowns as required in WAC 173-304-440 (2)(c); <br />(3) Inspection to ensure compliance with state and local air pollution laws and to comply with <br />WAC 173-304-405 (5). The inspection log or summary must be submitted with the <br />application; and <br />(4) How and where the fly ash, bottom ash and other solid wastes will be disposed of. <br />c. A closure plan to address: <br />(1) Estimate of closure year and cost; <br />(2) Methods of closure and methods of removing wastes, equipment and location of final disposal; <br />(3) Closure timing and notification procedures; and <br />(4) Final inspection by regulatory agencies. <br />3. Facility Standards. <br />WAC 173-304-440: Energy Recovery and Incinerator Standards, is hereby adopted by reference. <br />H. Recycling Facilities <br />1. General <br />Any facility must comply with the Kittitas County Solid Waste Management Plan. <br />2. Permit Application Contents. <br />a. In addition to the requirements of Section VI.A.2., applications shall include a proposed <br />methodology for a waste screening program to effectively remove and properly dispose of <br />unacceptable waste types. Additionally, application contents for recycling facilities shall <br />demonstrate compliance with the requirements of WAC 173-304-300. <br />b. An operations plan, closure plan, health and safety plan, haul route and site layout. <br />3. Facility Standards.