Laserfiche WebLink
11. Elevation and location of all existing and new utilities in the immediate vicinity of the <br />construction shall be shown on the plans. <br />12. Profiles for all curb returns (except medians). <br />C. Details. All details necessary for a complete set of plans that are not covered by reference to the <br />WSDOT Standard Plans such as walls, special drainage elements, major culverts, etc. shall be <br />included in the plans. <br />D. Standard Plans. The submitted plans shall include copies of all WSDOT standard plans (or <br />standard plans from other sources) that are referenced within the plans. <br />E. Temporary Erosion Control Plan. A temporary erosion/sedimentation control plan, showing the <br />location and control measures intended to minimize the effects of erosion and siltation due to <br />construction operations, shall be submitted with the construction plans and shall conform to the <br />requirements of the WSDOT Standard Specifications, <br />F, Signing and Striping Plan. All road development plans must incorporate a separate signage <br />and striping plan that consist of an overall area map noting all specific use areas, such as schools, <br />parks, recreation centers, library, commercial, industrial, etc. The pages following the area map <br />are to be broken down into road segments, for notation of signage and striping details. <br />G. Notes: <br />In addition to other notes required in these Standards, the following notes shall appear on the <br />cover sheet of all submittals containing roadway plans. If a cover sheet has not been used, they <br />shall be placed on the sheet of the plans containing roadway design criteria. <br />Inspection. Construction shall not begin until permits have been issued. If a Department <br />of Public Works site inspector is not available after proper notice of construction activity <br />has been provided, the permittee may commence work in the inspector's absence. <br />However, Kittitas County reserves the right to not accept the improvement if subsequent <br />testing reveals an improper installation. <br />2. Paving shall not start until the mix design is accepted by the County Engineer. <br />3. All stationing is based on centerline of roadways unless otherwise noted. <br />4. All elevations are on USGS DATUM with date. Point monument shall be shown on <br />construction location plans. <br />5. Unless otherwise provided for in these plans and specifications, all materials and <br />workmanship shall be in accordance with the requirements of the most current edition of <br />the State of Washington, Department of Transportation Standard Specifications for Road <br />and Bridge Construction and Title 12 of the Kittitas County Code. <br />Title 12 Kittitas County Code I Draft No. 5 - Working Draft forAdoption 6/12/2018 <br />89 <br />