2016-06-13-minutes-public-works-study-session

Home Browse Search

Existing survey data, or as -built data, may be used to produce flood studies and related products. However, if existing data are to be collected, the FEMA Region should be consulted before leveraging the best available existing survey data to ensure acceptability for the intended level of flood hazard study. Stream reaches are evaluated and prioritized for streamflow gage deployment. Cross sections are surveyed and rating curves produced at each gage location. Standards: All Field Survey work shall be performed in accordance with the standards specified in Section S – Standards. Deliverables: The CTP shall make the following products available to FEMA by uploading the digital data to the MIP, in accordance with the schedule outlined in Section 6. Where paper documentation is required by state law for professional certifications, the CTP may submit the paper in addition to a scanned version of the paper for the digital record. Please coordinate with the regional and/or state representative to verify state reporting requirements o Digital photographs of cross section locations and structures • Digital sketches of cross section and structure data • Documentation of the horizontal and vertical datum • Digital versions of draft text for inclusion in the FIS report • Digital survey data consistent with the Data Capture Technical Reference • Metadata file complying with the NFIP Metadata Profiles Specifications • Support documentation • Certification of Work • TSDN Narrative • FIRM Database files • A Summary Report that describes and provides the results of all automated or manual QA/QC review steps taken as outlined in the approved QA/QC Plan. Develop Hydrologic Data CTPs may consider including and completing this task in the MIP if the CTP believes data will need to be submitted during the course of the project, even if this task was not included in the MAS. In addition, leveraged hydrologic data must be documented and submitted to the MIP for this task Failure to submit this task when data should have been submitted could result in the workflow being reverted back to production tasks and could lead to a delay in the schedule. If the CTP obtains hydrologic data that was not included in the MAS, the CTP shall contact the region to submit a change request to include the task and leverage as part of the award and request that this task be added to the MIP workflow. Responsible Mapping Partner: Kittitas County Public Works .Scone: The CTP shall perform hydrologic analyses for the flooding source(s) identified in Table 1.7— Summary of Hydrologic Analyses. Hydrologic analysis activities include the determination of peak flood discharges, the use of rainfall -runoff models, regression equations, gage analysis, and hydrograph National FY16 Flood Risk Project MAS Template Version 1.0 Mapping Activity Statement No. {MASNo } 11