Loading...
HomeMy WebLinkAboutExhibit D for PSAALSCARCHITECTS We bring our clients’ stories to life. SPOKANE February 12,2025 203 N.Washington Ste.400 Spokane,WA 99201 Kittitas County P 509.838.8568 Facilities and Waste Operations aiscarchitects.com 925 Industrial Way Ellensburg,WA 98926 Attn:Patti Stacey,Director Re:Ellensburg Rodeo Arena Improvements Proposal for Project Completion Dear Patti, Thank you for this opportunity to provide Kittitas County with our proposal for completing the required NE services for the design and construction phases of your Ellensburg Rodeo Arena project.We have written this proposal letter to attach to a more formal Kittitas County form of agreement. Project Understanding Our proposal is based on the continuation of our team’s work in 2024,which resulted in a 50%complete Design Development package delivered in August 2024.The budget for the maximum allowable construction cost (MACC)is $12,244,000.The fundamental scope of work will include completion of the remaining 50%Design Development work, Construction Documents,Bidding,Construction Administration and Project Closeout phases as generally defined by the State of Washington Office of Financial Management NE (OFM)Guidelines. Project Tasks and Deliverables ALSC Architects P.S.and our consultant team will complete the Design Development Phase and provide a Design Development Report including the following: 1.Project Description 2.Site plan,floor plans,elevations,sections,and relevant details 3.Consultant preliminary plans depicting systems,locations,and other layout information 4.Architectural and consultant narratives describing systems included in the facility PRINCIPALS:Rustin L.Hail,AlA Ken J.Murphy,AlA,LEEDAP Indy S.Dehal,AlA Troy H.Bishop Kim Phelps,AlA Sheila K.Boyce Exhibit "D" ALsCARCHITECTS 5.Outline Specifications 6.Design Development Cost Estimate During this phase,meetings with Kittitas County representatives will occur every two or three weeks. The Construction Document Phase work will result in a full set of construction documents suitable for obtaining a building permit,bidding the project,and constructing the project. A final cost estimate will be provided along with construction drawings and technical specifications.Review packages will be provided at 50%,75%,and 90%completion. ALSC will coordinate the submittal and processing for obtaining a building permit.Plans will also include mitigation measures per the MOU with DAHP. ALSC will assist Kittitas County with a public bidding process,conduct a pre-bid conference,answer bidder questions,issue addenda as required,and participate in the bid opening.Once bid reviews are completed,ALSC will assist with the preparation of the Owner/General Contractor agreement. Construction and Closeout Phase services will be provided as outlined in the OFM guidelines.The ALSC team is anticipated to attend weekly virtual Owner/Architect/Contractor meetings and visit the site an average of two times per month throughout the Construction Phase. Project Team ALSC Architects will lead this project,assisted by the following consultants: 1.MACC Estimating —Cost Estimating 2.DCI Engineers —Civil and Structural Engineering 3.MW Engineering —Mechanical,Electrical and Plumbing Engineering 4.Gorman Preservation Associates —DAHP Historic Building Mitigation Copies of consultant scopes of work and fees are attached (See Attachment C). Project Schedule The work described will commence once a Notice to Proceed is received from Kittitas County.The project is expected to be ready to mobilize construction activities at the completion of the rodeo season in September 2025,with construction completion by the end of July 2026. 2025-009 —Ellensburg Rodeo Arena Completion Project —2025-02-12 ALscARCHITECTS Compensation and Terms ALSC Architects P.S.and our consultant team will perform the tasks described above for a lump sum of $984,973.00.Our detailed fee calculation based on OEM guidelines (Attachment B)is attached.In addition,an allowance of $20000.00 is recommended for reimbursable expenses for travel and per diem costs. ALSC will provide monthly invoices based on the percentage of the work completed. Payments will be due within 30 days of receipt of invoice.Late payments will incur an interest charge of 1.0%per month. Exclusions and Additional Services The scope of work shall include the tasks outlined above and in the attachments.Slight deviations in scope may be included within the proposed fee.Tasks or deliverables not included in the information above are not included in the proposed fee.Additional services beyond those included in the proposal are available for an additional fee calculated on an hourly basis utilizing the hourly rates in the attached Hourly Rates (Attachment A).Additional services will not be performed without prior written approval from Kittitas County representatives.Kittitas County will provide a geotechnical report for the construction site as well as an ALTA site survey. Reimbursable Expenses Expenses and services not directly provided by ALSC will be invoiced at one and 10/1 00 (1.10)times actual cost.Reimbursable expenses include travel,per diem,printing of documents)and expedited delivery service.It is assumed that Kittitas County will pay directly for all permitting costs and printing costs associated with the permitting,bidding,and construction phases of the project. Termination Either party may terminate the agreement for convenience after seven (7)days of written notice of intent to terminate.The Client shall be responsible for all costs and charges incurred up to the termination date,including reasonable expenses for ALSC to close the work and organize files.ALSC agrees not to charge for lost or anticipated profits on the work not completed and will provide .pdf copies of work files to Kittitas County upon receipt of final payment. 2025-009 —Ellensburg Rodeo Arena completion Project —2025-02-12 ALSCAICHITECTS Acknowledgment This proposal will remain valid for a period of 60 days. On behalf of our team,thank you very much for this exciting opportunity to assist you with the completion of your rodeo arena improvements. Respectfully, Rustin L.Hall/Director RLH:skm:2025-009 Attachments:Attachment A,Attachment B,Attachment C 2025-009 —Ellensburg Rodeo Arena completion Project —2025-02-12 ATTACHMENT A ALSCARCHITECTS SPOKANE 203 N.Washington Ste.400 Spokane,WA 99201 P 509.838.8568 alscarchitects.com 2025 HOURLY RATES CATEGORY PRINCIPAL ASSOCIATE PRINCIPAL SENIOR PROJECT DESIGNER SENIOR PROJECT MANAGER PROJECT MANAGER PROJECT ARCHITECT II LANDSCAPE ARCHITECT PROJECT DESIGNER II INTERIOR DESIGNER II PROJECT ARCHITECT I INTERIOR DESIGNER I INTERN ARCHITECT/DRAFTSMAN CLERICAL We bring our clients’stories to life. RATE $285.00 $190.00 $185.00 $180.00 $170.00 $155.00 $150.00 $145.00 $140.00 $125.00 $105.00 $95.00 $80.00 PRINCIPALS:Rustin L.Hall,AlA Ken i.Murphy,AlA,LEED AP Indy S.Dehal,AlA Troy H.Bishop Kim A.Phelps,AlA Sheila K.Boyce a, U, Iz xU a, C0 a,a E0U a,a, a Lfl .0 Sei ATTACHMENT C M get what you want ESTIMATING GROUP December 2,2024 Rustin Hall ALSC Architects 203 N.Washington,Suite #400 Spokane,WA 99201 Dear Rustin: I am providing this letter to summarize and confirm our working relationship on the Ellensburg Rodeo Arena Renovation project.As the cost estimating member of your team,I will provide the following: Basic Services Development of a probable construction cost for the project at the design development and construction documents phases of design.Costs shall reflect the level of design elements presented in the documents,plus appropriate design contingencies to encompass unidentified scope,schedule,and budget options to stay within the MACC. I understand that your mechanical,and electrical engineering consultants will provide me with their in-house cost information.I will review those costs and collaborate with you to establish the appropriate budget to include. ALSC will need to provide all drawings,specifications,models,and any other design information necessary to prepare the cost estimates.I will need these in electronic form only. My fee for the basic and supplemental services is $19,000 payable on completion. DD:$9,000 CD:$10,000 Acceptance: ALSC Architects Rustin Hall ___________________________________________________ Signature Date Sincerely, Brian Sayler (509)867-6573 Brian.sayler@maccestimating.com maccestimating.com P0 Box 935,Liberty Lake,WA 99019 A “1pj 601 W First Aye,Ste 1300 Spokane,WA 99201,USA‘%ø’Engineers 509.838.9020 mwenglneers.com February 3,2025 Rustin Hall ALSC Architects Spokane,WA PROJECT:Ellensburg Rodeo Arena Improvements PROJECT #:2015.501.xx CC:Mark Wilke,Jake Deering —MW Engineers RE:Engineering Services Request Rustin, Thank you for including MW as part of this great team.We look forward to continuing the success of this project. We offer this proposal to provide engineering services for your review and acceptance. PROJECT DESCRIPTION:This project consists of improvements to the existing Ellensburg Rodeo Arena in Ellensburg, WA as documented in the 50%DD documents issued in September 2024. SCHEDULE: Design Phase —Spring thru Summer of 2025. Bid &Construction Phase —Fall 2025 thru Summer 2026. Project MACC PROJECT ASSUMPTIONS I Project Square footage $12,243,818 20,188 BASIC SERVICES PROPOSED FEES:We propose to provide basic engineering services for a fixed fee based on the estimates in the following fee matrix.These fees are based upon the 50%DD cost estimates for this project. Mechanical team partners include energy modeling by Solarc Energy Group. BASIC SERVICES PROPOSED FEES Phase Description Mechanical Electrical Total 100%DD $4,294 $3,955 $8,249 CD $14,599 $13,446 $28,045 BID $859 $791 $1,650 CA $11,594 $10,678 $22,272 CO $859 $791 $1,650 Cost Estimating $2,400 $2,400 $4,800 Record Documents $1,560 $1,560 $3,120 Subtotal Basic Service Fees $36,165 $33,621 $69,786 Page 1 of 4 A ‘601W First Aye,Ste 1300 Spokane,WA 99201,USA\b Engineers mwenglneers.com BASIC SERVICES:The following are descriptions of the engineering services included in the basic services for the project.Services outlined as a potential supplemental service or indicated to be excluded elsewhere in this proposal are excluded from the basic services. MECHANICAL:Design and specification of plumbing and HVAC systems including temperature controls and selective demolition. ELECTRICAL:Design and specification of electrical systems including utility service,building distribution, equipment connections,branch circuits,receptacles,pathways,electrical load calculations and selective demolition. FIRE ALARM:Design and specification of code minimum fire alarm systems. LIGHTING:Design and specification of lighting systems and the associated lighting control systems.Services include conceptual design,renderings,final design,and photometric calculations. TELECOM DESIGN:Design and specification of a complete Telecommunications distribution system.Design to consist of pathways,cable tray,cabling,equipment racks,patch panels,outlets,and terminations.Active telecommunications equipment will be provided and installed by the Owner. WIRELESS ACCESS NETWORK ROUGH-IN:Basic services exclude the design of the wireless access network system.Electrical basic services include the design and specification of Wireless Access Point (WAPs) infrastructure consisting of pathways and wiring based upon Owner provided WAP layout drawings. SECURITY ACCESS CONTROL ROUGH-IN:Basic services exclude the design of security access systems. Electrical basic services include the design and specification of access control system infrastructure consisting of pathways based upon Owner provided security design drawings.Door hardware shall be designed and specified by Division 08 and are not included in this scope of work. DRAWING PREPARATION:Basic services include preparation of drawings using Revit developed to BIM Level 300 as defined in AlA document G202-2013 in construction documents. COST ESTIMATING:Basic services include an opinion of probable construction costs for MEP at the 100% Design Development and 100%Construction Document phases of the project. RECORD DOCUMENTS:Preparation of record documents is transferring the contractor’s legibly recorded record of field changes to original Revit or CADD models/files when developed by the contractor in accordance with the construction documents. Page 2 of 4 IiVV 601W First Aye,Ste 1300 Spokane,WA 99201,USAEngineers509.838.9020 mwengineers.com POTENTIONAL SUPPLEMENTAL SERVICES PROPOSED FEES:We propose to provide the below supplemental engineering services for a fixed fee based on the estimates in the following fee matrix. I’ii*HI IJ!l1tI lYA[I*.— Design I CA Description Split Mechanical Electrical Total Energy Life Cycle Cost Analysis (ELCCA)100/0 $7,530 $300 $7,830 Subtotal $7,530 $300 $7,830 POTENTIAL SUPPLEMENTAL SERVICES:The following are descriptions of potential extra services that might be desired for this project that are not included in the basic services fee. ENERGY LIFE CYCLE COST ANALYSIS (ELCCA):Provide Energy Life Cycle Cost Analysis energy modeling in accordance with the ELCCA guidelines and Washington State Legislature.The ELCCA will look at (3)HVAC options to compare over a 50-year life cycle.This typically occurs in design development phase.Provide energy modeling assistance to support architectural system evaluations for the LCCA report. REIMBURSABLE EXPENSES:Reimbursable expenses will be billed at cost plus 10%and include those items described below. Electrical I Total REIMBURSABLE EXPENSE ALLOWANCE ____________ Travel Expenses —8 Trips Mechanical $1,200 REIMBURSABLE EXPENSE ALLOWANCE:The following are descriptions of potential reimbursable expenses that are required for this project and are not included in the basic services fee. TRAVEL EXPENSES:This project is located more than 50 miles from Spokane,WA.Therefore, reimbursable expenses are anticipated for travel to the project site.The assumed quantity of combined MEP trips is (2)for Design Phase,(4)for Construction Phase and (2)for Closeout Phase. FEE ASSUMPTIONS: 1.Agreement is in accordance with AlA document C401-2017,Standard Form of Agreement Between Architect and Consultant. 2.MACC will not exceed $12.3M.If the project MACC is increased,the design fees will be renegotiated to align with the increased MACC. 3.Should changes to the MACC occur due to construction funding allocations that necessitate modified scope and re-design,we assume that this fee would be renegotiated. 4.If inflation due to unpredictable market conditions necessitates redesigning to value engineer the project, we assume that this fee would be renegotiated. 5.If equipment lead times or manufacturer changes necessitate redesign or reselection of equipment once submittals are completed,a supplemental service request will be submitted at that time. Page 3 of 4 $1,200 $2,400 A ri 601 W First Aye,Ste 1300 Spokane,WA 99201,USA %‘1’Engineers 509.838.9020 mwenglneers.com 6.Significant delays between design phases can result in inherent design inefficiencies,code changes,project construction costs and even programmatic changes.Should the project be significantly delayed and resurrected,we assume that this fee would be renegotiated. 7.Construction administration includes up to (6)2-person trips to the site including punch list and back check of punch list.Should phasing and construction sequencing stretch beyond this period,the fee would be renegotiated. 8.Services are based upon a single bid package for a single General Contractor. 9.Professional services will be billed during design and construction administration as indicated in the Basic Services and Potential Supplemental Services Tables. FEE EXCLUSIONS: 1.Services not specifically listed in this proposal. 2.Value engineering,commissioning,constructability review,conformed documents. 3.LEED participation and documentation. 4.Mechanical/civil utilities more than 5 feet outside the building. 5.Fire protection design. 6.Security design. 7.Audio Visual design. 8.Solar PV design and Electric Vehicle Charging design. 9.Sports lighting design.Relocation of existing sports lighting is included in base lighting services. 10.Wireless access network design. 11.Acoustic analysis or acoustical engineering,If the project has sound criteria,it is assumed that the project team will have an acoustician that we collaborate with in the design phase. 12.Permitting agency fees. Thank you again for including MW Engineers on this exciting project!Please do not hesitate to reach out to me with any questions. Sincerely, Joel Enevold,PE Principal,Electrical Systems Page 4 of 4 DCIEflGIflEERS Professional Service Agreement February 5,2025 Rustin Hall ALSC Architects 203 N.Washington,Suite 400 Spokane,WA 99201 Office:(509)g3g-g56g rhall@alscarchitects.com Re:Ellensburg Rodeo Arena Improvements Ellensburg,Washington Dear Rustin: Thank you for contacting us regarding the Ellensburg Rodeo Arena Improvements (“Project”).After reviewing your request,we’ve determined we can help you accomplish your project goals.DCI Engineers (“DCI”)submits this proposed professional services agreement to ALSC Architects (“Client”)for structural engineering services.Please let us know if you have questions about any aspect of this agreement. PROVIDING SERVICE I INNOVATION I VALUE SERVICE -Our extensive experience and attention to the needs of the client,the other consultants and the construction team puts us in a unique position to provide value-added solutions for every project.DCI’s comprehensive understanding of project goals and challenges provides the design and construction team with next- level service.We encourage open communication among team members to avoid misunderstanding and to create a healthy team approach during the entire project. INNOVATION -The depth of our company-wide technical knowledge and experience allows us to design structural systems which meet aesthetic goals and are efficient for the project conditions.Our firm advocates for creative structural solutions to benefit our clients and team partners.Our dedicated staff are familiar with tackling individual challenges and achieving big-picture solutions. VALUE -DCI recognizes the structural design affects the initial construction cost, project schedule,and long-term value of the project.We strive to establish good communication with the project team to identify goals and to work collaboratively to Washington I Oregon I California I Texas IAlaska I Colorado I Montana I Delaware I Pennsylvania 2 meet or exceed them.It’s our practice to measure value by improving a built environment’s constructability and structural quality. IMPORTANCE OF SUSTAINABILITY DCI is devoted to reducing the impact our designs have on the environment.As a part of our corporate responsibility,in addition to our years of sustainable design, Living Building Challenge and LEED®Certified projects,we have signed onto the SE2050 Commitment Program,which includes a goal of reducing and eliminating embodied carbon in our projects by 2050. DCI’S commitment includes participating in the design process by informing stakeholders about the environmental impact of design choices and encouraging further discussion about sustainable implications of our projects beyond code minimums and green building rating system requirements. PROJECT DESCRIPTION The project consists of the renovation of the existing Ellensburg Rodeo Arena located in Ellensburg,WA.The project consists of renovating the northwest portion of the existing facility with new restrooms,a bar area,seating,elevated grandstands and grandstand roof. This proposal is based on the email dated january 28,2025,with the “Total Estimated Bid Amount”of $12.2 million. SCOPE OF ENGINEERING SERVICES DCI’S proposed scope of structural engineering services is described below.Items not specifically identified in this proposal are outside of DCI’s scope. 1.PRIMARY STRUCTURAL SERVICES I DCI will provide structural engineering design services for the Primary Structural Frame,defined as the primary Ioadbearing components of the building,such as foundations,basement walls,columns,floor and roof framing,and lateral systems to resist wind and seismic forces.As part of Basic Services,DCI will: a.Perform structural analysis and design to prepare structural Construction Documents,including plans,sections,and details. b.Coordinate with the permitting jurisdiction to help obtain a building permit. c.Provide structural specifications in the form of general notes on the drawings. Coordination of the general notes with the project specifications will be accomplished by red-mark or electronic editing of standard CSI specification files provided by the architect. d.Attend design meetings and coordinate with the other members of the design team.We have assumed in-person meetings will be held in Spokane. e.Provide support and document clarifications during the bidding process. Washington I Oregon I California I Texas I Alaska I Colorado I Montana I Delaware I Pennsylvania 3 f.Provide Construction Administration.This phase of the project includes the following scope of work. •Review submittals including shop drawings and documents from fabricators, subcontractors,and bidder-designed elements. •Respond to requests for information (RFIs)and provide Structural Sketches (SSK5)for clarification of design intent. •Provide structural observations as required.DCI has included scope for up to two site visits within our proposed fees.Additional site visits may be invoiced on a time and materials basis. •Structural observation site visits are intended as limited visual observations of structural components for general conformance to the approved Construction Documents prepared by DCI. •Review of the materials testing and inspection reports provided by the materials testing and inspection company. 2.ADDITIONAL SERVICES I Additional Services beyond those identified in the Primary Structural Services and Supplemental Services may be provided as requested for additional fees.Additional Services are NOT included in the Primary Structural Services or Supplemental Services.Typical Additional Service items are outlined here.Please contact us if you have specific requests and would like to discuss pricing. a.Bidder-Designed Deferred Submittals:Design or detailing of non-primary elements of the building that are traditionally included as a bidder-designed deferred submittals,including curtain wall or cladding,metal stairs,guardrails and handrails,interior non-load bearing walls &soffits,and exterior building maintenance equipment.The primary structure will be designed and coordinated to accommodate the loads from these elements. b.Means &Methods:Construction engineering for temporary excavation and construction shoring,tower crane or personnel hoist foundation and tie-back systems,temporary bracing,demolition of existing structures,or other contractor means and methods work. STRUCTURAL DOCUMENT DEVELOPMENT We understand REVIT will be utilized to produce the Construction Documents for this project.The digital files are not intended for use for construction dimensioning,such as shop drawings,layouts,etc.,but the files can be made available to the contractor for informational purposes,provided such use is at the contractor’s own risk and is subject to the execution of DCI’S standard digital media agreement. Washington I Oregon I California I Texas I Alaska I Colorado I Montana I Delaware I Pennsylvania 4 ASSUMPTIONS AND QUALIFICATIONS OF PROPOSAL 1.Due to the preliminary nature of the available information,DCI’S fees are primarily based on the project type,perceived complexity,and gross square footage of the building.If substantial changes are made to this concept,DCI may be entitled to additional fees. 2.DCI assumes a geotechnical study will be made available before design commences.The report should include a description of soil types,condition, stability,bearing capacity,seismic site class,and groundwater conditions.The report should also provide recommendations for structural design criteria and subgrade preparation. 3.The Primary Structural Frame will be designed to support typical mechanical, electrical,plumbing,fire protection and building maintenance equipment.Delay or late selection of these systems may require additional fees if structural design modifications are required.Design of seismic bracing or anchorage for any of the MEP or fire protection systems are not included,but may be provided as an Additional Service. 4.Our Construction Administration fees do not cover the correction of construction errors or design changes made after the start of construction. SUMMARY OF STRUCTURAL ENGINEERING FEES Engineering services will be billed monthly on a fixed fee basis unless otherwise noted below.Fixed fees are billed on a percent-complete basis and hourly services will be billed according to DCI’s attached Schedule of Expenses. DCI reserves the right to review and revise all design fees for any proposal accepted more than 90 days after date of submission,and to review and revise all Construction Administration fees for any project where construction starts more than one (1)year after commencement of design. PRIMARY STRUCTURAL SERVICES _____ FEE FEE TYPE 100%Design Development $12,400 Fixed Fee (Complete from 50%DD) Construction Documents $28,500 Fixed Fee Bidding $1,850 Fixed Fee Construction Administration $24,800 Fixed Fee Project Closeout (Includes As $1,850 Fixed Fee Built Drawings) Direct project reimbursable expenses include in-house production plotting, reprographic services,courier costs,and travel expenses.These will be billed at 1.10 times the direct cost as noted on the attached Schedule of Expenses. Washington I Oregon I California I Texas IAlaska I Colorado I Montana I Delaware I Pennsylvania 5 ACCEPTANCE OF AGREEMENT Professional services for this project shall be provided according to this proposed professional services agreement and the attached Terms and Conditions (together, the “Agreement”).This Agreement shall become effective immediately upon the earlier of execution by the Client or by the Client’s communication of a direction to proceed with the services,including by electronic mail,and shall remain in effect unless and until amended or superseded by a written agreement executed by both parties. We thank you again for the opportunity to propose these services for the Snoqualmie Community Center Expansion.We look forward to working with you and the design team on this exciting project. SINCERELY, DCI EngineersfrL (Justin Cook,PE SE Principal 707 W 2nd Ave Spokane,WA 99201 509-455-4448 Approved by I _____________________________________ Date I Printed Name I ATTACHMENTS This Agreement is executed with the following attachments which are part of this Agreement: General Terms and Conditions Schedule of Expenses Washington I Oregon I California I Texas IAlaska I Colorado I Montana I Delaware I Pennsylvania GENERAL TERMS AND CONDITIONS These General Terms and Conditions,together with the professional services agreement,constitute the “Agreement”between DCI and Client.This Agreement shall become effective immediately upon execution by Client or upon Client’s written direction (including by electronic mail)to proceed with the services,and shall remain in effect unless and until amended or superseded by a written agreement executed by both parties STANDARD OF CARE:DCI shall perform its services consistent with the degree of skill and care ordinarily exercised by members of the same profession currently practicing in the same or similar locality under the same or similar circumstances DCI makes no warranty with respect to its services,express or implied. CLIENT FURNISHED INFORMATION:Client shall provide DCI with a survey describing the physical characteristics,legal limitations and utility locations for the Project site,a written legal description and geotechnical reports.DCI shall be entitled to rely on,and shall not be responsible for the accuracy,completeness or timeliness, of services and information furnished by Client and Client’s consultants,contractors and agents. PAYMENTS:Client’s failure to pay any invoice within 30 days of the invoice date shall constitute a material breach of this Agreement by Client and DCI shall have the right to suspend its services,including the withholding of deliverables,without liability to the Client for any costs or damages resulting from such suspension.Amounts unpaid 30 days after the invoice date will be subject to a monthly finance charge of 1.5%on the unpaid balance or maximum rate allowed by law,whichever is less. Client shall have no right of setoff against any billings of DCI for disputed services or claims. ADDITIONAL SERVICES:Additional Services may be provided after execution of this Agreement without invalidating the Agreement.DCI will notify Client of the need to perform Additional Services.Additional Services shall entitle DCI to compensation as agreed upon by the parties. DELAY:DCI shall not be liable for any costs or delays resulting in whole or in part from causes beyond the control and without the fault or negligence of DCI or its subconsultants,including,without limitation,stoppages and strikes,acts of God and natural disaster,failure of a public agency to act in a timely manner,and/or acts of Client and its consultants,contractors and agents,including,without limitation,their failure to furnish information in timely fashion and/or their faulty or untimely performance CONTINGENCY RESERVE:Client and DCI acknowledge that changes may be required because of possible omissions,ambiguities or inconsistencies in the Project plans and specifications and that the costs of the Project as a result may exceed the construction contract sum.Client agrees to establish a reasonable design contingency reserve (no less than 5%of anticipated construction costs)to pay for any such costs. Client further agrees not to make any claim against DCI with respect to any payments made to any construction contractors within the limit of the design contingency reserve. INDEMNIFICATION:Client shall indemnify and hold harmless (but not defend)DCI, its officers and employees,from and against any and all damages,losses and expenses (including reasonable attorney’s fees)arising from claims by third parties to the extent caused by the negligence or willful misconduct of Client,its employees or anyone for whom Client may be legally responsible.For purposes of the foregoing indemnification provision only,Client waives any immunity it may have under any applicable worker’s compensation laws. LIMITATION OF LIABILITY:In recognition of the relative risks,rewards and benefits of the Project to both Client and DCI,the risks have been allocated such that Client agrees that DCI’s maximum liability to Client for any and all injuries to persons or property,claims,losses,expenses,damages,legal fees or costs,and claim expenses,whether arising out of DCI’s breach of this Agreement,or arising out of DCI’S breach of duties owed independent of this Agreement,if any,including but not limited to breach of warranty,indemnity,negligence,strict liability,or other tort or statutory cause or causes,or otherwise related to formation of this Agreement or services rendered by DCI in connection herewith,or any amendment thereto,shall not exceed ten times DCI’S fee or $500,000,whichever is less.In the event that the foregoing is deemed unenforceable by a court or arbitrator having jurisdiction,DCI’S liability shall in no event exceed any limits of liability insurance then available at the time of settlement or judgment. CONSEQUENTIAL DAMAGES:DCI and Client waive consequential damages for claims,disputes or other matters in question arising out of or relating to this Agreement This mutual waiver is applicable,but not limited,to lost profits,loss of capital,loss of use,or any other indirect,special or consequential damage,whether arising in contract, tort,warranty or strict liability. INSTRUMENTS OF SERVICE:DCI’s Instruments of Service (as defined in AlA Document A2O1TM-2017)will be prepared and are intended for use solely for this Project.DCI’s Instruments of Service also include any Buitding Information Models (BIM)or other electronic files (“Digital Media Files”)prepared by DCI.DCI shall retain all rights,including ownership and copyright,to the Instruments of Service.Provided Client substantially performs all obligations under this Agreement,including prompt payment of all sums when due,DCI grants Client a non-exclusive license to use the Instruments of Service solely and exclusively for purposes of constructing,using and maintaining the Project If Client modifies or uses DCI’s Instruments of Service without retaining DCI,then Client releases DCI from and against any liability,claims or damages arising out of such use and further agrees to defend,indemnify,and hold harmless DCI from and against any liability,claims or damages arising out of such use.Except for rightful termination of this Agreement by Client,termination of this Agreement shall terminate the license granted in this section.DCI shall have the right to include photographic or artistic representations of the Project among DCI’s promotional and professional materials. DIGITAL MEDIA FILES.DCI may provide certain Digital Media Files,including DCI’s BIM model,to Client upon request,but any use of the Digital Media Files by the Client shall be at Client’s sole risk.DCI does not warrant the Digital Media Files in any way. Unless otherwise specified in this Agreement,only the officially-issued,stamped and signed documents are to be interpreted as correct.Client agrees to not further disseminate the Digital Media Files without DCI’s prior written consent. PROJECT SITE:DCI shall not have control over,charge of,or responsibility for construction means,methods,techniques,sequences or procedures,or for safety precautions and programs in connection with construction of the Project,nor shall DCI be responsible for any contractor’s failure to construct the Project in accordance with the requirements of the construction agreement.DCI shall have no responsibility for the discovery,presence,handling,removal or disposal of,or exposure of persons to, hazardous materials or toxic substances in any form at the Project site. MEDIATION:DCI and Client agree that as a condition precedent to any litigation,all disputes arising out of or relating to this Agreement or DCI’s services shall be submitted to mediation.The cost of the mediator shall be shared equally by the parties DCI and Client further agree to include the foregoing provision in any and all agreements with independent contractors and consultants retained for the Project. LAW AND FORUM:This Agreement shall be governed by and construed in accordance with the laws of the State of Washington,without reference to laws regarding choice of law.Any mediation or litigation relating to this Agreement shall be brought in Seattle,WA CORPORATE RESPONSIBILITY:DCI’s services shall not subject DCI’s individual employees,officers or directors,including any engineer who affixed his or her seal to the plans for the Project,to any personal legal exposure for the risks associated with this Project.Client agrees that as Client’s sole and exclusive remedy,any claim, demand or suit shall be directed and/or asserted only against DCI,a Washington state corporation,and not against any of DCI’s individual employees,officers or directors. TERMINATION:Either party may terminate this Agreement upon not less than seven (7)days’written notice should the other party fail to substantially perform in accordance with the terms of this Agreement through no fault of the party initiating the termination. THIRD PARTIES:Nothing contained in this Agreement shall create a contractual relationship with,or a cause of action in favor of,a third party against either DCI or Client.Neither DCI nor Client shall assign this Agreement without the written consent of the other. RIGHTS CUMULATIVE:All rights and remedies of either party under the Agreement, at law and in equity,will be cumulative and not mutually exclusive;the exercise of one right or remedy will not be deemed a waiver of any other right or remedy. ENTIRE AGREEMENT:If any term,condition or provision of this Agreement,or the application to any circumstances is determined to be invalid or unenforceable to any extent,the remaining provisions of this Agreement shall not be affected but shall instead remain valid and fully enforceable Neither party has relied upon any statement,estimate,forecast,projection,representation except for those expressly contained in this Agreement.This Agreement incorporates and supersedes all prior negotiations,agreements and representations. COUNTERPARTS:This Agreement may be executed in any number of counterparts, each of which shall be deemed an original but all of which together shall constitute one complete instrument Transmission by fax or electronic mail of an image of an executed counterpart shall have the same binding effect as the hand-delivery of a manually-signed original. June 2022 SCHEDULE OF EXPENSES DCI ENGINEERS PROFESSIONAL SERVICES Clerical and Administrative 1000 Clerical and Administrative 1010 Clerical and Administrative 1020 Technical Designer 2000 Technical Designer 2010 Technical Designer 2020 Technical Designer 2030 Technical Designer 2040 Senior Technical Designer 2100 Senior Technical Designer 2110 Senior Technical Designer 2120 Senior Technical Designer 2130 Senior Technical Designer 2140 Senior Technical Designer 2150 Project Designer 2200 Project Designer 2210 Project Designer 2220 Project Designer 2230 Project Engineer 3000 Project Engineer 3010 Project Engineer 3020 Project Engineer 3030 $80/hr $1 00/hr $1 20/hr $80/hr $90/hr $1 00/hr $120/hr $1 40/hr $1 00/hr $120/hr $1 40/hr $160/hr $1 80/hr $200/hr $80/hr $1 00/hr $120/hr $1 40/hr $1 00/hr $120/hr $140/hr $1 60/hr Senior Project Engineer 3300 Senior Project Engineer 3310 Senior Project Engineer 3320 Senior Project Engineer 3330 Project Manager 3100 Project Manager 3110 Project Manager 3120 Project Manager 3130 Senior Project Manager 3200 Senior Project Manager 3210 Senior Project Manager 3220 Senior Project Manager 3230 Associate 4000 Associate 4010 Associate 4020 Associate 4030 Associate Principal 4100 Associate Principal 4110 Associate Principal 4120 Associate Principal 4130 Principal Engineer 4200 Principal Engineer 4210 Principal Engineer 4220 Principal Engineer 4230 Principal Engineer 4240 $1 20/hr $140/hr $160/hr $180/hr $120/hr $1 40/hr $1 60/hr $1 80/hr $140/hr $1 60/hr $1 80/hr $200/hr $1 60/hr $1 80/hr $200/hr $220/hr $1 80/hr $200/hr $220/hr $240/hr $200/hr $220/hr $250/hr $300/hr $350/hr REIMBURSABLE SERVICES Copies and Architectural Plotting with Plot Files Size Original Plots and Architectural Plotting with Drawing Files Media Size Fee Media Fee Bond A,B+C Size $4.00/Plot Bond A+B Size $0.20/Plot Bond DE+E1 Size $7.75/Plot Bond C+D Size $2.00/Plot Bond E+E1 Size $3.00/Plot Vellum A,B+C Size $6.00/Plot Vellum D,E+E1 Size $11 .50/Plot Color A Size $1 .00/Plot Color B Size $1 .50/Plot Mylar A,B+C Size $10.00/Plot Color Scan to File $5.00 Mylar DE+E1 Size $20.00/Plot Out of Office Services/Expenses Mileage Reimbursement $1.lOx Direct Cost IRS Standard Mileage Rate August 2022 Professional Services Agreement February 11,2025 Rustin Hall,AlA Principal ALSC Architects 203 N.Washington Street,Suite 400 Spokane,WA 99201 509.838.8568 rhall@alscarchitects.com Re:Civil Engineering Services Proposal for Ellensburg Rodeo Arena Improvements (Completion)in Ellensburg,Washington Dear Rustin: Thank you for contacting us regarding the completion of the Ellensburg Rodeo Arena Improvements (“Project”).DCI Engineers (“DCI”)submits this proposal for professional services agreement to ALSC Architects (“Client”)for civil engineering services.Please let us know if you have questions about any aspect of this proposal agreement. PROVIDING SERVICE I INNOVATION I VALUE DCI has provided structural and civil engineering services both locally and nationally on an ever-increasing number of projects.Our commitment to providing Service, Innovation,and Value to our clients and team partners has been a significant contribution to the success of their projects.Thank you for the opportunity to submit this proposal! PROJECT DESCRIPTION This proposal is based on the email dated January 28,2025 (from Rustin Hall)and the previously contracted 50%Design Development civil design work for the project in 2024.The project now proposes to complete the remaining design scope of work and construction for the Ellensburg Rodeo Arena Improvements project.The project scope and cost has been set at a current construction budget of $1 2.2M.The project proposes a new northwest covered seating section,new pedestrian bridge, concourse improvements,and a portion of the support services under the seating. In addition,the area north of the existing and new seating will be paved to provide ADA access from the Golden Buckle all the way over to the west end of the arena. LOCAL EXPERTISE,NATIONAL EXPERIENCE.LEARN MORE AT DCI-ENGINEERS.COM 2 Water,sewer,and storm drainage services will be stubbed to the future northeast seating area. The anticipated major elements of the civil engineering design are anticipated to be as follows: •New paving for ADA access along the north side of the stands •Water service improvements for the existing and proposed buildings on the north half of the arena (and the Golden Buckle).Major items include new frost-free hydrants,connections to buildings,and the ability to winterize specific buildings without draining the entire water system on-site. •New fire hydrants and associated on-site water line improvements to comply with fire department requirements. •Sewer service improvements including a new sewage lift station to serve the existing and proposed buildings in the north half of the arena. •Storm water system for the new paved area along with the existing and proposed roofs on the north half of the arena. •Include grading measures (berm etc.)along the east half of the site to direct culvert overflow away from the main arena area.It is uncertain what specific measures will be needed or if a solution is even feasible until the topographic survey is completed. SCOPE OF ENGINEERING SERVICES DCI’S proposed scope of civil engineering services is described below.Items not specifically identified in this proposal are assumed to be outside of DCI’S scope.If additions or changes to the scope are desired,please inform us so we may revise our scope and fees accordingly. 1.PRIMARY CIVIL SERVICES I DCI will provide civil engineering design services for the project,defined as Primary Civil Services.As part of Primary Civil Services,DCI will: a.Prepare 100%Design Development Documents and 100%Construction Documents for temporary sediment and erosion control,site demolition,on- site grading,stormwater drainage,and underground utility services,site/civil cost estimate,CSI format outline civil/site project specifications,and any other scope items included in this proposal. i.Provide site planning review and comments,as needed,during development of the site plan. ii.Coordinate with the ALSC,the project Owner,design team,and the City of Ellensburg as required during the design process and permit review process. iii.Coordinate with utility purveyors for site utility services. iv.Provide stamped stormwater calculations as required by the City of Ellensbu rg. v.Provide CSI format project specifications for civil/site scopes of work. vi.Attend design coordination meetings as needed,assumed via conference call.Any requested meetings in Ellensburg will be billed according to the LOCAL EXPERTISE,NATIONAL EXPERIENCE.LEARN MORE AT DCI-ENGINEERS.COM 3 per trip fee (including time and travel expenses)listed under Summary of Fees below. vii.Respond to questions or comments from the AHj(s). b.Provide Bidding &Negotiation services that include responses to bidder questions and permitting review comment revisions and responses.DCI will answer questions which may arise during the bid process by providing the appropriate document clarification or supplementary information. c.Provide Construction Administration,including review of submittals,responses to RFIs,and field fixes as required for quality control relative to site work construction.DCI will answer questions which may arise during the bid process by providing the appropriate document clarification or supplementary information.DCI will also provide a punch list inspection and closeout documentation for project completion.Any subsurface storm water facilities, existing or installed as part of this project,will be registered with the Washington State Department of Ecology’s Underground Injection Control (UIC) program as required by the state and local AHJ5. d.Provide Project Closeout services including a punch list inspection,punch list report,and closeout documentation for project completion AHj required certifications (including Record Drawings). 2.SUPPLEMENTAL SERVICES j DCI will also provide civil engineering design services for elements that are not part of the Primary Civil Services when pre-approved by the Client.Fee ranges are used where the scope of the Supplemental Services is not well-defined. a.Trips to the Ellensburg will be completed only when requested by the Client or Pre-Approved in advance by the Client.Trips will be invoiced on a per trip basis according to the Supplemental Services fee shown in the table below.The per trip fee includes travel time and expenses. b.We anticipate that a Construction Storm Water General Permit (CSWGP)will be required for the project.This permit is administered by the Washington State Department of Ecology (WSDOE).Obtaining this permit entails filing a Notice of Intent (NOl)with the state,placing a legal notice in the local newspaper for consecutive weeks,and preparing a Storm Water Pollution Prevention Plan (SWPPP)report for the project.DCI will facilitate the obtaining of this permit for the project.Any fees incurred by DCI as part of this process will are included in our proposed fixed fee for this scope of work. If the design process is extended for any reason beyond our control,DCI reserves the right to negotiate additional services for the increased engineering and management effort.Excessive schedule delays may also require additional fees to cover our increased management time.See the Supplemental Services section for price range. LOCAL EXPERTISE,NATIONAL EXPERIENCE.LEARN MORE AT DCI-ENGINEERS.COM 4 If there are substantial and significant plan changes after work commences,we reserve the opportunity to discuss a reasonable modification to our fee.Any LU modification to the scope of services will be prepared as an amendment to this D contract. .—I CONSTRUCTION DOCUMENT DEVELOPMENT We understand Aut0CAD (release 2025 Civil3D or earlier)will be utilized to produce the Construction Documents for this project.The digital Aut0CAD files are not intended for use for construction dimensioning,such as shop drawings,layouts, etc.,but these digital files can be made available to the contractor for informational purposes,provided that such use is at the contractors own risk and is subject to the execution of DCI’s standard digital media agreement. ASSUMPTIONS AND QUALIFICATIONS OF PROPOSAL In the development of this fee proposal,we have made the following assumptions. Please let us know if these assumptions are not accurate so we may determine if any modifications to this proposal are necessary. 1.There is an existing City well located on the east side of the site.The new improvements will be designed in accordance with the well head protection criteria (paving,building,no infiltration etc.).This proposal does not include work related to mitigation of the existing well head protection area not affected by this project (animal pens etc.). 2.This proposal does not include analysis of offsite water,sewer,or storm drainage systems. 3.DCI assumes that the stormwater will be disposed of using on-site infiltration. Stormwater treatment is anticipated to be accomplished using standard swales or bio-retention facilities. 4.DCI assumes a geotechnical study will be made available before design commences.The report should include a description of soil types,condition, stability,infiltration capacity,and groundwater conditions.The report should also provide recommendations for pavement thickness and subgrade preparation. 5.We will assume that a preliminary site plan showing the proposed lot layout and other site configurations will be shared with DCI. 6.This proposal does not include any offsite extensions of streets,roads or utilities,nor does it include any offsite entitlement issues such as cross-access easements,access permits,or right-of-way negotiations.This proposal does not include any mitigation studies (such as traffic studies,sensitive area studies,or environmental assessments)or mitigation measures (such as environmental remediation or underground storage tank removal).We will assume that a copy of any protective covenants,traffic studies,preliminary utility studies,correspondence,meeting notes,applications and so on will also be provided to DCI and updated copies will be supplied as needed. LOCAL EXPERTISE,NATIONAL EXPERIENCE.LEARN MORE AT DCI-ENGINEERS.COM 5 7.We will assume the client will complete all entitlement and pre-application requirements such as an environmental checklist,pre-application meetings, rezone,land use actions,and parcel segregations.The client will pay all plat application fees,recording fees,bonds and insurances,subdivision guarantees, and develop lists of adjacent property owners.The proposal does not include any additional subdivision of the property. 8.This proposal does not include the design of any site lighting,building lighting, retaining walls,or landscaping and irrigation. SUMMARY OF CIVIL ENGINEERING FEES Engineering services will be billed monthly on a fixed fee basis unless otherwise noted below.Fixed fees are billed on a percent-complete basis and hourly services will be billed according to DCI’s attached Schedule of Expenses. DCI reserves the right to review and revise all design fees for any proposal accepted more than 90 days after date of submission. PRIMARY CIVIL DESIGN SERVICES FEE FEE TYPE Last 50%Design Development $6,200 Fixed feeDocuments Construction Documents $1 8,910 Fixed fee Bidding $1,220 Fixed fee Construction Administration $1 6,470 Fixed fee Punch List/Closeout $1,220 Fixed fee Total $44,020 Fixed fee Unless noted otherwise,direct project reimbursable expenses are separate from our fees.These include in-house production plotting,reprographic services,courier costs,and travel expenses.These will be billed at 1.10 times the direct cost as noted on the attached Schedule of Expenses. SUPPLEMENTAL SERVICES (WHEN REQUiRED AND PRE-APPROVED BY CLIENT)FEE FEE TYPE Per Trip Unit fee Site Visits to Ellensburg Area $1,000 (includes time &Only if Requested expenses) Construction Storm Water $3,500 Fixed feeGeneralPermit(CSWGP) LOCAL EXPERTISE,NATIONAL EXPERIENCE.LEARN MORE AT DCi-ENGiNEERS.COM 6 PROJECT DESIGN SCHEDULE DCI will coordinate with the design team to establish reasonable deadlines.The critical path decisions which are required to advance the design must be made in a timely manner.It is imperative we are able to freeze the architectural backgrounds at a reasonable time ahead of our milestone deadlines for permit,bid,and construction.Changes to these backgrounds too close to any deadline might result in a delay while we update and review the new information. ACCEPTANCE OF AGREEMENT Professional services for this project shall be provided according to this proposed professional services agreement and the attached Terms and Conditions (together, the “Agreement”).This Agreement shall become effective immediately upon the earlier of execution by the Client or by the Client’s communication of a direction to proceed with the services,including by electronic mail,and shall remain in effect unless and until amended or superseded by a written agreement executed by both parties. Thank you again for the opportunity to propose these services for the Ellensburg Rodeo Arena Improvements project.We look forward to working with ALSC and the design team on this exciting project. SINCERELY, DCI Engineers4AL Wade Geihausen,PE Principal 707 W.2nd Avenue Spokane,WA 99201 509.227.6917 Approved by I _________________________________________ Date I Printed Name ________________________________________ Date _________________ ATTACH MENTS This Agreement is executed with the following attachments which are part of this Agreement: General Terms and Conditions Schedule of Expenses Civil Fee Breakdown LOCAL EXPERTISE,NATIONAL EXPERIENCE.LEARN MORE AT DCI-ENGINEERS.COM GENERAL TERMS AND CONDITIONS These General Terms and Conditions,together with the professional services agreement,constitute the ‘Agreement”between DCI and Client for DCI’S services on the project at issue in the Agreement (the “Project”).This Agreement shall become effective immediately upon execution by Client or upon Client’s written direction (including by email)to proceed with the services and shall remain in effect unless and until amended or superseded by a written agreement executed by both parties. STANDARD OF CARE:DCI shall perform its services consistent with the degree of skill and care ordinarily exercised by members of the same profession currently practicing in the same or similar locality under the same or similar circumstances.DCI makes no warranty with respect to its services,express or implied. CLIENT FURNISHED INFORMATION:Client shall provide DCI with a survey describing the physical characteristics,legal limitations,utility locations,a legal description,and geotechnical reports for the Project site.DCI shall be entitled to rely on,and shall not be responsible for the accuracy,completeness,or timeliness of services and information furnished by Client,its consultants,contractors and agents. PAYMENTS/ADDITIONAL SERVICES:Client’s failure to pay any invoice within 30 days of the invoice date shall constitute a material breach of this Agreement and DCI shall have the right to suspend its services,including the withholding of deliverables, without liability for any costs or damages resulting from such suspension.Client agrees to pay a monthly finance charge equal to the lesser of 1.5%on the unpaid balance or the maximum rate allowed by law on any amounts unpaid 30 days after the invoice date,and DCI’s attorney’s fees and costs of collection incurred in pursuit of payment of sums owing to DCI,whether or not suit is filed.Client shall have no right of setoff against any billings of DCI for disputed services or claims.Additional Services may be provided after execution of this Agreement without invalidating the Agreement.DCI will notify Client of the need to perform Additional Services which shall entitle DCI to compensation as agreed upon by the parties. DELAY:DCI shall not be liable for costs or delays resulting from causes beyond the control and without the fault of DCI or its subconsultants,including stoppages and strikes,acts of God and natural disaster,failure of a public agency to act in a timely manner,and/or acts of Client and its consultants,contractors and agents,including regarding their failure to furnish information in a timely fashion and/or their faulty or untimely performance. CONTINGENCY RESERVE:Client and DCI acknowledge that changes may be required because of possible omissions,ambiguities or inconsistencies in the Project plans and specifications and that the costs of the Project as a result may exceed the construction contract sum.Client agrees to establish a reasonable design contingency reserve (no less than lO%of anticipated construction costs)to pay for any such costs. Client further agrees not to make any claim against DCI with respect to any payments made to any construction contractors within the limit of the design contingency reserve. INDEMNIFICATION:Client shall indemnify and hold harmless (but not defend)DCI, its officers and employees,from and against any and all damages,losses and expenses (including reasonable attorney’s fees)arising from claims by third parties to the extent caused by the negligence or willful misconduct of Client,its employees, or anyone for whom Client may be legally responsible.For purposes of the foregoing indemnification provision only,Client waives any immunity it may have under any applicable workers compensation laws. LIMITATION OF LIABILITY:In recognition of the relative risks,rewards and benefits of the Project to both Client and DCI,the risks have been allocated such that Client agrees that DCI’s maximum liability to Client or anyone claiming through client for any and all injuries to persons or property,claims,losses,expenses,damages,legal fees or costs,and claim expenses,whether arising out of the formation of,performance of services under,or breach of this Agreement or any amendment thereto,or arising from DCI’s breach of duties owed independent of this Agreement,including those based on statute,tort,common law or otherwise,shall not exceed ten times the fees paid to DCI hereunder,or $500,000,whichever is less.In the event that the foregoing is deemed unenforceable by a court or arbitrator having lurisdiction,DCI’s liability shall in no event exceed the applicable limits of liability insurance required under this Agreement which are then available at the time of settlement or judgment. CONSEQUENTIAL DAMAGES:DCI and Client waive consequential damages for claims,disputes or other matters in question arising out of or relating to this Agreement. This mutual waiver is applicable,but not limited to,lost profits,loss of capital,loss of use,or any other indirect,special,or consequential damage,whether arising in contract, tort,warranty,or strict liability. INSURANCE:DCI agrees to carry the following types and amounts of insurance: commercial general liability (CGL)($1,000,000 per occurrence,$2,000,000 annual aggregate);automobile ($1,000,000 combined single limit):worker’s compensation (at statutory limits);employer’s liability ($500,000 per incident,person,and disease):and professional liability ($1,000,000 per claim,$2,000,000 annual aggregate).DCI will name Client as an additional insured on its CGL and automobile policies if Client makes a written request for such coverage within seven (7)days of execution of this Agreement. LIMITATION OF ACTIONS:As an inducement fof DCI to take on the Project,which carries the risk of liability that could extend far into the future,any suit against DCI arising from Dcl’s performance or nonperformance of services under the Agreement,or related to the formation,performance or breach of this Agreement,will be forever barred if not filed within: (i)three (3)years following substantial completion of the Project to which this Agreement pertains;or (it)if this Agreement does not pertain to construction of a new project,three (3) years after the date DCI’s services under this Agreement have been concluded.This term has been bargained for at arms’length. INSTRUMENTS OF SERVICE:Dcl’s Instruments of Service (as defined in AlA Document A2017M.2017)are intended for use solely for this Project and shall also include any Building Information Models (BIM)or other electronic files (“Digital Media Files”)prepared by DCI.DCI shall retain all rights,including ownership and copyright, to the Instruments of Service.Provided Client substantially performs all obligations under this Agreement,DCI grants Client a non-exclusive license to use the Instruments of Service solely for purposes of constructing,using,and maintaining the Project If Client modifies or uses DCI’s Instruments of Service without retaining DCI, then Client releases DCI from any liability,claims or damages arising out of such use and further agrees to defend,indemnify,and hold harmless DCI from and against any liability,claims or damages arising out of such use.Except for rightful termination of this Agreement by Client,termination of this Agreement shall terminate the license granted in this section.DCI shall have the right to include photographic or artistic representations of the Project among DCI’s promotional and professional materials. DIGITAL MEDIA FILES:DCI may provide certain Digital Media Files,including DCI’s BIM model,to Client upon request,but any use of the Digital Media Files by the Client shall be at Client’s sole risk.DCI does not warrant the Digital Media Files in any way. Unless otherwise specified in this Agreement,only the officially-issued,stamped and signed documents are to be interpreted as correct.Client agrees not to further disseminate the Digital Media Files without DCIs prior written consent. PROJECT SITE:DCI shall not have control over,charge of,or responsibility for construction means,methods,or sequences,or for safety precautions or programs in connection with the Project,nor shall DCI be responsible for any contractor’s failure to construct the Project in accordance with the requirements of the construction agreement.DCI shall have no responsibility for the discovery,handling,or removal of.or exposure of persons to,hazardous or toxic substances at the Project site. MEDIATION,LAW &FORUM:As a condition precedent to any litigation,all disputes arising out of this Agreement or DCI’s services shall be submitted to mediation.The cost of the mediator shall be shared equally by the parties.The parties further agree to include the foregoing provision in all agreements with independent contractors and consultants retained for the Project.This Agreement shall be governed by the laws of the State where the Project is located,without regard to its choice of law rules.Any litigation relating to this Agreement shall be brought in a state or federal court having jurisdiction over the dispute in the State where the Project is located;alternatively, DCI at its sole discretion may elect to bring suit in (or transfer any suit filed under this Agreement to)King County,Washington Superior Court,in which case Washington law (excluding its conflicts of laws rules)shall apply. CORPORATE RESPONSIBILITY:DCI’s services shall not subject DCI’s individual employees,officers,or directors,including any engineer who affixed his or her seal to the plans for the Project,to any personal legal exposure for the risks associated with this Project.Client agrees that all claims,demands,or suits shall be directed and/or asserted only against DCI,a Washington state professional corporation. TERMINATION:Either party may terminate this Agreement upon not less than seven (7)days’written notice should the other party fail to substantially perform in accordance with the terms of this Agreement through no fault of the party initiating the termination. THIRD PARTIES:Nothing contained in this Agreement shall create a contractual relationship with,or a cause of action in favor of,a third party against either DCI or Client.Neither party shall assign this Agreement without the written consent of the other. RIGHTS CUMULATIVE:All rights and remedies of either party under the Agreement, will be cumulative and not mutually exclusive;the exercise of or failure to exercise one right or remedy will not be deemed a waiver of any other right or remedy,and no waiver shall be effective unless made in writing. ENTIRE AGREEMENT:If any term of this Agreement,or its application to any circumstances,is determined to be invalid or unenforceable to any extent,the remaining provisions of this Agreement shall remain valid and fully enforceable. Neither party has relied upon any statement or representation except for those expressly contained in this Agreement.This Agreement incorporates and supersedes all prior negotiations,agreements,and representations. COUNTERPARTS:This Agreement may be executed in any number of counterparts, each of which shall be deemed an original but all of which together shall constitute one complete instrument.Transmission by fax or email of an image of an executed counterpart shall have the same effect as a manually-signed original. FebrUary 2024 SCHEDULE OF EXPENSES -DCI ENGINEERS PROFESSIONAL SERVICES Clerical and Administrative 1000 Clerical and Administrative 1010 Clerical and Administrative 1020 Technical Designer 2000 Technical Designer 2010 Technical Designer 2020 Technical Designer 2030 Technical Designer 2040 Senior Technical Designer 2100 Senior Technical Designer 2110 Senior Technical Designer 2120 Senior Technical Designer 2130 Senior Technical Designer 2140 Senior Technical Designer 2150 Project Designer 2200 Project Designer 2210 Project Designer 2220 Project Designer 2230 Project Designer 2240 Project Designer 2250 Project Designer 2260 Project Engineer 3000 Project Engineer 3010 Project Engineer 3020 Project Engineer 3030 Project Engineer 3040 Project Engineer 3050 Senior Project Engineer 3300 Senior Project Engineer 3310 Senior Project Engineer 3320 Senior Project Engineer 3330 Senior Project Engineer 3340 Senior Project Engineer 3350 $80/hr $100/hr $120/hr $80/hr $90/hr $100/hr $1 20/hr $140/hr $100/hr $120/hr $1 40/hr $160/hr $180/hr $200/hr $80/hr $1 00/hr $120/hr $1 40/hr $1 60/hr $180/hr $200/hr $1 00/hr $120/hr $l4OIhr $1 60/hr $1 80/hr $200/hr $1 20/hr $1 40/hr $160/hr $180/hr $200/hr $220/hr Project Manager 3100 Project Manager 3110 Project Manager 3120 Project Manager 3130 Project Manager 3140 Project Manager 3150 Project Manager 3160 Project Manager 3170 Senior Project Manager 3200 Senior Project Manager 3210 Senior Project Manager 3220 Senior Project Manager 3230 Senior Project Manager 3240 Senior Project Manager 3250 Senior Project Manager 3260 Senior Project Manager 3270 Associate 4000 Associate 4010 Associate 4020 Associate 4030 Associate 4040 Associate 4050 Associate 4060 Associate Principal 4100 Associate Principal 4110 Associate Principal 4120 Associate Principal 4130 Associate Principal 4140 Associate Principal 4150 Associate Principal 4160 Principal Engineer 4200 Principal Engineer 4210 Principal Engineer 4220 Principal Engineer 4230 Principal Engineer 4240 Principal Engineer 4250 Principal Engineer 4260 Principal Engineer 4270 $1 20/hr $1 40/hr $160/hr $180/hr $200/hr $220/hr $240/hr $260/hr $140/hr $160/hr $1 80/hr $200/hr $220/hr $240/hr $2601hr $280/hr $160/hr $180/hr $200/hr $220/hr $240/hr $260/hr $280/hr $180/hr $200/hr $220/hr $240/hr $260/hr $280/hr $300/hr $200/hr $220/hr $250/hr $300/hr $350/hr $400/hr $500/hr $600/hr REIMBURSABLE SERVICES Out of Office Services/Expenses Mileage Reimbursement $1.lOx Direct Cost IRS Standard Mileage Rate This Schedule of Expenses is subject to adjustment in accordance with DClc normal review practices.For billing purposes,DCI will use the Schedu/e of Expenses in effect at the time of service. February 2024