LP-24-00002 Nelson View - Decision - HE Decision 7-24-24

Home Browse Search

2.1.1.4. A Road Name Application is required for the road serving the joint -use driveway to lots 1-3. 2.1.1.5. Easement must show a fire apparatus turnaround at termination or within 150 feet on shared residential driveway. 2.1.1.6. All shared residential driveways shall have a maintenance agreement recorded with the final plat approval that specifies consistent maintenance in accordance with the approved plat/plans. 2.1.2.Other 2.1.2.1. Except as exempted in KCC 14.05.060, no grading or filling upon a site involving more than one hundred (100) cubic yards shall be performed without a grading permit from the County Engineer or Public Works designee. An application for grading in excess of five hundred (500) cubic yards shall be accompanied by an engineered grading plan. 2.1.2.2. All plats must show the acceptance signature of the County Engineer. The acceptance block shall be as follows (per KCC 16.24.170): EXAMINED AND APPROVED This day of , A.D., 20 Kittitas County Engineer 2.1.2.3. All accesses and roads shall meet the requirements of the International Fire Codes including Appendix D. 2.1.2.4. If a gate is to be installed, a permit from the Kittitas County Fire Marshal's Office shall be obtained. 3. Survey 3.1. Engineer of Record, Sewage Note, Potable Water Note, Existing Locations of Fences and Structures, and Road Surfacing and Width shall be on final plat. 3.2. A Title Report shall be submitted and the legal description on the Title Report shall match the legal description on the final plat. 3.3. If topographic elements are used on the final plat, they shall meet the requirements of WAC 332- 130-145. 3.4. The final plat shall meet the requirements of KCC 16.20. 4. Water/Sewer 4.1. In accordance with KCC 13.35.027, the applicant shall provide one of the following documents before final plat approval: LP-24-00002 Nelson View Long Plat Page 10 of 13