Laserfiche WebLink
17 | P a g e <br /> <br />Customer area shall include adequate space for customer lounge, public use telephone, <br />and restrooms as stated in the following table. <br />Administrative area shall be provided for employee offices, work areas, and storage and <br />may be included in the Customer square footage allotment. <br />Maintenance area shall include adequate and dedicated space for employee work areas, <br />shop areas, and storage for aircraft parts and equipment and may be included in the <br />hangar square footage allotment as listed in the below table. <br />Facilities space requirements table. Refer to AC Appendix 16-FAA ADG Group Table <br />Facilities Group I Piston and <br />Turboprop Aircraft <br />Group II Piston and <br />Turboprop Aircraft <br />Groups I and II <br />Turbojet Aircraft <br />Customer Area <br />(Lessee) 400 ft2 400 ft2 400 ft2 <br />Hangar 3,000 ft2 3000 ft2 4000 ft2 <br /> <br />Insurance - Airframe and Engine Repair and Maintenance. <br />• Comprehensive general liability insurance with minimum of $1,000,000 <br />combined single limit coverage per occurrence, including products liability and <br />completed operations. <br />• Automobile liability -$1,000,000, any auto. <br />• Fire, casualty, and comprehensive coverage on Lessee-owned buildings equal <br />to the replacement cost of the buildings. <br />• Hangar keepers; equal to the total value of the aircraft in your care, control, and <br />custody. <br /> <br />5 Avionics Sales, Repair and Service <br />An avionics or instrument maintenance operator is a commercial operator engaged in <br />the business of maintenance or alteration of one or more of the items described in 14 <br />CFR Part 145 – Repair Stations, (i.e., aircraft radios, electrical systems, or instruments). <br />In addition to the general requirements set forth in Article 2, each operator at the <br />Airport shall comply with the following Minimum Standards set forth in this article. <br />For operators performing just benchwork (i.e., no removal and replacement services are <br />being performed), the minimum facility requirements are indicated in the following <br />table (excluding hangar requirements): <br />For operators performing services beyond benchwork (i.e., removal and replacement