Laserfiche WebLink
KITTITAS COUNTY BID PROPOSAL <br /> <br />Liquid Asphalt Material Bid 2022 Page 8 of 14 <br /> <br />Section 9-02 Bituminous Materials <br />9-02.1 (2) Medium-Curing (MC) Liquid Asphalt <br />9-02.1 (3) Rapid-Curing (RC) Liquid Asphalt <br />9-02.1 (6) Cationic Emulsified Asphalt <br /> <br /> <br />HAZARDOUS SUBSTANCE TAX (WAC458-20-252): <br /> <br />All out of-state suppliers (i.e. not located in Washington State) shall consider the following when <br />submitting a bid for liquid asphalt. Kittitas County will revise the basis of award by adding the <br />hazardous substance tax (HS Tax), calculated at the statutory rate (currently, seven tenths of one <br />percent (.007)). If a similar tax has been paid in another state, credit may be taken against the tax <br />owed to Washington State. The supplier must supply documentation of these taxes paid along <br />with the bid documents. In-state suppliers who have previously paid the hazardous substance tax <br />shall enter an amount of zero (0). <br /> <br />CONTRACTOR'S PROTECTIVE CLAUSE: <br /> <br />There shall be no obligation to have available or deliver any or all of the products included in this <br />proposal in the customary manner when such availability or deliveries are prevented or hindered by <br />an Act of God, fire, strike, partial or total interruption or loss or shortage of transportation facilities, <br />or by other similar or different acts of civil or military authorities, or by other like causes beyond the <br />control of the Contractor. <br /> <br />SPECIAL PROVISIONS: <br /> <br />Furnish truck transport deliveries of liquid asphalt in grades of CSS-1, CMS-2P, CRS-2P, CMS -2P, <br />HFRS-P1, and HFE-150. All liquid asphalt shall meet the current specifications of the Washington <br />State Department of Transportation for grades of asphalt specified. <br /> <br />Asphalt Emulsion HFE-150 Specifications <br /> <br />Test on Emulsion Minimum Maximum <br /> - Viscosity @ 122 Degree F SFS T59 50 400 <br /> <br /> - Sieve test %, T59 -- 0.1 <br /> <br />Distillation: <br /> - Oil Distillate by volume of emulsion % T59 -- 5 <br /> - Residue % T59 65 -- <br />Tests on the Residue from Distillation: <br /> - Penetration 77 Degrees F, 100g, 5s T49 150 300 <br /> - Float at 140 Degrees F., sec., 1200 -- <br /> <br /> <br /> <br /> <br /> <br />