Laserfiche WebLink
6.) Front of house mix position should be located on center with the performance stage at <br />a distance no closer than fifty feet (50') and no farther than ninety feet (90') from the <br />stage. When a center location is not possible, it is critical that the position be located <br />directly in front of the sound wings, on axis with the main PA. There must be no <br />physical obstructions between the stage and the console. FOH position should be <br />appropriately blocked off from general public access, either by use of barricade, <br />interlocking bike rack, or construction of a "FOR platform". If platform is necessary, <br />the minimum acceptable dimensions for total FOH footprint are 8' wide by 6' deep. <br />7.) ARTIST'S production manager will determine the placement of the house speaker <br />system. PURCHASER understands and agrees that speaker stacks located behind the <br />downstage microphone line are unacceptable. Please discuss any seating kill problems <br />with ARTIST'S production manager upon advance. <br />B.) MONITORS & WIRELESS REQUIREMENTS (FLY DATES): <br />EC TOURING carries a Midas Pro2C console at FOH and a Midas Pro2C at monitor world; in addition, EC <br />TOURING also carries its own wireless IEM rig, wireless handheld microphones, stage monitors for center <br />wedge mix and side fills, microphones, mic stands, XLR cabling, stage boxes, power distro, and stage power. <br />In the event of a fly date, please see sound requirements below: <br />Preferred consoles are AVID Profile for FOH, and either Avid Profile or AVID SC48 for <br />monitor world (SC48 is only acceptable for monitor world if it has two 16 -channel output <br />cards installed for a total of 32 accessible outputs). <br />1.) Eight (8) Shure PSM1000 ear units with required combiners, packs, and antennas. <br />2.) Two (2) PSM600 hardwired ear packs, each with stereo cable <br />3.) One (1) Mono 3 -way side fill system set up downstage, able to be placed at head <br />height. <br />4.) Inbound Wireless: 2 x Shure UR4D units (i.e. 4 channels TOTAL of UR41) <br />wireless) with 4 x hand held microphones (UR2). We will provide our own Heil PR35 RF <br />Capsules for 2 of these channels, and SM58 RF capsules are required for the other 2. All <br />wireless units, handhelds, and packs MUST be in wireless frequency bands matched with <br />one -another. <br />5.) Backline Wireless: 5 x Shure ULX-D single receiver units with 9 x ULX-D body pack <br />transmitters. ULX-D units should NOT be racked together, as they will be placed in each <br />musician's location and will therefore be spread out amongst the stage. All body pack <br />transmitters must include TA4F-1/4" TS adapters to ensure proper connections to ARTIST <br />instruments. All wireless units and packs MUST be in wireless frequency bands matched <br />with one -another. <br />EASTON CORBIN RIDER 11 <br />Revised 08 April, 2020 <br />