Laserfiche WebLink
20.02.030 Driveways. <br />Any County driveway hereafter created longer than 150'in length shall shallcomply with KCC <br />1 2. 04. 0 8 0, Table 4 - 48 . (Or d. 202 Lztl'292L 9r d, 2/t.l 495, 20 | 0) <br />20.02.040 Fire lanes. <br />Fire lanes shall remain clear from obstructions, including snow accumulations, vehicles, and any <br />other impediment to emergency services response. (Ord. 2010-005, 2010) <br />20.02.050 Bridges. <br />Any bridge or box culvert hereafter erected, modified, altered or repaired shall meet a live load <br />bearing of no less than 75,000 lbs. All box culveft, bridge designs, and load ratings shall be <br />stamped by a registered professional engineer in the State of Washington. An approved sign with <br />the load rating shall be posted on the ingress side of the bridge. <br />@ than ene-fisur{h ef the bridge; rvith ne s+ruetu-al elements ineluded in <br />County Public Works. (Ord. 2021-xxx. 2021; Ord. 2010-005,2010) <br />Chapter20.03 <br />Gates <br />Sections <br />20.03.010 Definitions. <br />20.03.020 Gates. <br />20.03.0 I 0 Definitions. <br />Private Road--An access road serving 3 or more lots, residences or multi-family units, that is <br />privately owned and maintained for the use of the owner(s) or those having expressed or implied <br />permission from the owner(s). (Ord. 2010-005,2010) <br />20.03.020 Gates. <br />Any gate hereafter installed on any private road within Kittitas County shall meet the following <br />conditions: <br />l. The width of the gate shall be no less than 16 feet, <br />2. Any locking mechanism must be approved by the Fire Marshal, <br />3. The locking mechanism shall be electronic or key operated, with a Fire Marshal approved <br />key box located at the gate, <br />4. Any electronic codes for the gate shall be given to the fire district and left in the approved <br />key box. Upon any change to the code, the fire district shall be notified immediately as to <br />the new code, and the key box shall be updated. <br />5. A permit shall be issued by the Fire Marshal prior to the commencement of any work. <br />ArO-2010-045, 2010)