Laserfiche WebLink
20.02.030 Driveways. <br />Any County driveway hereafter created longer than 150' in length shall shall comply with KCC <br />12.04.080, Table 4-4B. (Ord. 2021-xxx, 2021; Ord. 2010-005, 2010) <br />20.02.040 Fire lanes. <br />Fire lanes shall remain clear from obstructions, including snow accumulations, vehicles, and any <br />other impediment to emergency services response. (Ord. 2010-005, 2010) <br />20.02.050 Bridges. <br />Any bridge or box culvert hereafter erected, modified, altered or repaired shall meet a live load <br />bearing of no less than 75,000 lbs. All box culvert, bridge designs, and load ratings shall be <br />stamped by a registered professional engineer in the State of Washington. An approved sign with <br />the load rating shall be posted on the ingress side of the bridge. <br />Exception: Repairs of less than one fourth of the bridge, with no structural elements included in <br />the repair.New bridges and repairs of existing bridges shall require a permit through Kittitas <br />County Public Works. (Ord. 2021-xxx, 2021; Ord. 2010-005, 2010) <br /> <br />Chapter 20.03 <br />Gates <br />Sections <br />20.03.010 Definitions. <br />20.03.020 Gates. <br />20.03.010 Definitions. <br />Private Road--An access road serving 3 or more lots, residences or multi-family units, that is <br />privately owned and maintained for the use of the owner(s) or those having expressed or implied <br />permission from the owner(s). (Ord. 2010-005, 2010) <br />20.03.020 Gates. <br />Any gate hereafter installed on any private road within Kittitas County shall meet the following <br />conditions: <br />1. The width of the gate shall be no less than 16 feet, <br />2. Any locking mechanism must be approved by the Fire Marshal, <br />3. The locking mechanism shall be electronic or key operated, with a Fire Marshal approved <br />key box located at the gate, <br />4. Any electronic codes for the gate shall be given to the fire district and left in the approved <br />key box. Upon any change to the code, the fire district shall be notified immediately as to <br />the new code, and the key box shall be updated. <br />5. A permit shall be issued by the Fire Marshal prior to the commencement of any work. <br />(Ord. 2010-005, 2010)