Laserfiche WebLink
e. Known existing wells within 200 feet of the project limits. If there are no wells, such <br />statement shall be included on the plan. <br />2. Existing and proposed property and right-of-way lines, easements, tracts, and all other legal <br />boundaries. Type and dimension of easements or tracts are to be clearly labeled. Property <br />lines and right-of-way lines are to be dimensioned. Parcel numbers shall be labeled. <br />3. Survey tie lines to section corners or quarter corners, consistent with that shown on the plat. <br />4. Roadway centerline alignment and stationing based on centerline of roadway. Other <br />alignments shall reference the centerline stationing. <br />5. All roadways and roadway names. <br />6. North arrow and view port scale. <br />7. Match lines and consecutive sheet numbers, beginning with cover sheets. <br />8. Legend using APWA standard symbols. <br />9. Section, township, and range on each sheet. <br />10. Temporary erosion control. <br />11. Roadway alignments with 100 foot stationing and 25 foot tic marks, reading from west to <br />east/south to north including station labeling and dimensions of all roadway width <br />transitions that deviate from the typical roadway section(s). <br />12. Station, offset, and critical elevation (flowline, rim, invert of pipe, etc.) of all existing and <br />proposed drainage, sewer, or other utility structures. <br />13. Station and elevation of all horizontal curves including PI, PC's, PT's, etc.; high or low point, <br />existing and proposed, centerline bearings, distances, and complete curve data. <br />14. Centerline alignment and stationing of all non -single family residential driveways and all <br />intersecting roadways. <br />15. Storm drainage surface flow direction arrows, particularly at intersections and all high and <br />low points. <br />16. Storm drainage pipe flow direction arrows. <br />17. Curb return radii, existing and proposed; stations and elevations of all curb returns; mid- <br />point elevations, intersection elevations and grades. <br />18. Pedestrian curb ramp locations, dimensions, grades, and construction detail references that <br />are designed to a sufficient level of detail to ensure the constructability of ADA compliant <br />ramps and pedestrian surfaces. <br />19. Construction plans for intersection improvements shall include the following elements as <br />applicable: <br />Title 12 Kittitas County Code I Draft No. S— Working Draft forAdoption 6/1212018 <br />87 <br />