Ord-2016-023 - Laserfiche WebLink

Home Browse Search

k. In accordance with Section R301 .2.1.5, where there is local historical data documenting structural damage to buildings due to topographic wind speed-up effects, the jurisdiction shall fill in this part of the table with "YES." Otherwise, the jurisdiction shall indicate "NO" in this part of the table . I. In accordance with Figure R301 .2{4 )A , where there is local historical data documenting unusual wind conditions, the jurisdiction shall fill in this part of the table with "YES" and identify any specific requirements . Otherwise, the jurisdiction shall indicate "NO" in this part of the table. m. In accordance with Section R301 .2.1.2.1, the jurisdiction shall indicate the wind-borne debris wind zone{s). Otherwise , the jurisdiction shall indicate "NO" in this part of the table . 3. Professional Preparation of Plans : Kittitas County shall require a Washington State licensed design professional , licensed under the provisions of RCW 18.08, WAC 308-12 (for Architects) or RCW 18.43 (for Engineers) to stamp, prepare or oversee the preparation of plans and calculations for buildings or structures when ANY of the following criteria are met but is not limited to the following: a. A building of any occupancy over 4,000 square feet. Exception : residential buildings that do not contain more than 4 dwelling units; farm buildings of any size associated with commercial agriculture; bUildings such as garages, sheds, barn or shelters for animals and machinery that are used in connection with or auxiliary to farm buildings, or in connection with or accessory to residential buildings of four dwelling units or less. b. Buildings containing five or more residential dwelling units. Exception: building s less than 4000 square feet. c. All log and timber frame structures and log and timber frame structural components. This includes any log or beam style trusses used in stick framed buildings. d. All structures located above 70-psf ground snow load that are regulated by the International Residential Code. e. All structures located above 50-psf ground snow load that are regulated by the International Building Code . 4. Permit application and construction plan submittal : All submitted construction documents must be of sufficient detail and clarity to indicate the nature and extent of the work proposed. The amount of detail required will vary, depending on the nature and complexity of the project. Additional documentation such as truss engineering, lateral and gravity calculations, energy code information , etc . may also be required . Building permit applications and drawings deemed incomplete by Kittitas County Community Development Services will not be accepted. The following are minimum submittal standards for construction drawings: a. Plans drawn to a minimum of 1/4" scale on minimum page size of 11" x 17". b. Plans must have clear and readable text. c. Permit application in compliance with RCW 19 .27 .095 and RCW 19.27.097. 5. Recorded easernen1s : The app li cant sha ll jdentlfr.a ll recorded easements on-the construction documents .submitled w!lh , the permit applioation . The pe rmit Slppli cation shall also in cl ude a copy of recQrded ea"sements al ong with th e si fe ola n as required by Sectloo R1 06.2 of the IRC. All existing easements. dghls-of"way , well protecti oQs zone s, etc , 'sha ll li>e IdentlfiedQll the site olao and GOnsidered for the placement of buildings , septic syste ms. ro ad wa¥S. and ot her infrastructure. The location ,of all easements on the site olan shall be the respensiblilty of IheapplicarrL 2016 Docket Enabling Ordinance Ord, # 2016-023 Page 14 December 6, 2016