Laserfiche WebLink
State of Washington, Department of Ecology <br />IAA No. C1800153 <br />6. All registers must have the following configurable water consumption data functions: Leak <br />detection, high usage, zero usage, and backflow detection. <br />7. All registers must have an external antenna port. <br />Installation Specifications: <br />1. Functional AMI -capable meters must be installed by a licensed plumber or contractor prior to the <br />"Building Permit Final Inspection" approval. <br />2. Documentation (e.g., installers invoice) of installation, including the following information, must <br />be sent to Ecology. <br />a. Name, mailing address, and site address of property\well owner <br />b. Meter serial number <br />c. County tax parcel identification number <br />3. The meter must be installed according to the manufacture specifications despite varying <br />installation conditions. For example: variable pipe -fittings, pipe sizes, well locations, and <br />landscape conditions. <br />4. Meter must be installed in a horizontal pipeline with the register facing upward and readily <br />accessible for reading. To meet accuracy specifications, the meter should not be mounted at more <br />than a 10% angle (either slanted along the pipe or tilted to the side). In most applications, no <br />straight pipe length, upstream or downstream is necessary. <br />5. Meters must be installed 8 to 12 inches below the meter box lid, or as appropriate for location and <br />geographic area. <br />6. The meter box lid must be made of composites (not cast iron). <br />Data Management Requirements: <br />The following parameters are required and must be supplied to Ecology directly through the service <br />provider's data management system or by the County. <br />1. Person\Organization Parameters: <br />a. Last or Organization Name <br />b. First Name <br />c. Address (mailing) <br />d. City (mailing) <br />e. State (mailing) <br />f. Zip Code (mailing) <br />g. Site Address (if different than mailing address) <br />h. Contact Last Name (if different than owner) <br />i. Contact First Name (if different than owner) <br />j. Phone Number <br />k. Phone Type (e.g., home, mobile) <br />1. Email <br />2. Meter Parameters: <br />a. Meter ID (if different then the meter serial number) <br />b. Meter Serial Number <br />c. Register Serial Number <br />d. Meter Type <br />e. Meter Model <br />£ Installed Date <br />g. Meter Location <br />11 <br />Version 8/29/16 <br />