Laserfiche WebLink
EIIensburg,Washington Wayfinding Master Plan <br />Arrows <br />It is recommended that Type D arrows,shown below,should be used in all motorist-oriented signage in the Ellensburg wayfinding <br />s or i lan-d fra rs,ate set of arrows,also shown below,should be utilized. <br />Figure 8:Vehicular and Pedestrian Directional Arrows <br />Materials <br />Pole-MountedSignage <br />.Sign panels should feature custom,digitally-printed layouts with 3M UV-cured inks over 3M Engineer Grade Reflective Sheeting.This <br />should be overlaid with 3M ElectroCut Film.Panels should be 0.125-gauge aluminum. <br />.Breakaway posts and decorative post features should be constructed of MUTCD-specified,WSDOT-approved powder-coatedmetal.Signs <br />installed in pedestrian areas should also include a decorative slip jacket at the base of the post. <br />.Signs on existing light standards may be used with City of Ellensburg and/or WSDOT approval. <br />.All installed signs should meet federal and state requirements for minimum height and breakaway features.Minimum height for the <br />bottom edge of directional trailblazers and parking signs is seven feet above grade. <br />Monurnent-Style Signage <br />.The monument should be constructed of stone and block with concrete footers. <br />.Letters and graphic elements should be constructed of aluminum and feature backlit LED or other lighting for nighttime display. <br />15